Payment & Shipping Terms:
|Appearance:||Light Yellow Flakes||Package:||25kg Or 500kgs Bag|
|Melting Point:||98-105℃||Monomers:||Phenol And Formaldehyde|
|Flow:||Long||Application:||Impregnating Glass Cloth|
♦ Appearance: Flakes ♦ Resin Type: Novolac
♦ Resin Monomer: Phenol and Formaldehyde
♦ Catalyst: Acid ♦ Curing Agent content: Hexamine
Phenol Formaldehyde Resin is novolac phenolic resin (two-step),which is produced by condensing a molar excess of phenol to formaldehyde in the presence of an acid catalyst. This produces a thermoplastic resin. To cure this resin, a hardening agent is used, HMTA (or hexa). Under heat and pressure, it yields ammonia and formaldehyde as methylene groups to cure the resin, hence the term “two-step,” because of the two formaldehyde additions. A novolak phenolic resin has an infinite shelf life under normal storage conditions.Cured phenolic resin provides the rigidity necessary to maintain structural integrity and dimensional stability even under severe conditions.
♦. Bonding Strength
The primary use of phenolic resin is as a bonding agent. Phenolic resin effortlessly penetrates and adheres to the structure of many organic and inorganic fillers and reinforcements, which makes it an ideal candidate for various end uses.
♦. High Temperature Performance
A key characteristic of thermoset phenolic resin is its ability to withstand high temperature under mechanical load with minimal deformation or creep. In other words, cured phenolic resin provides the rigidity necessary to maintain structural integrity and dimensional stability even under severe conditions.
♦. Chemical Resistance
Phenolic resins accommodate the harsh exposure of severe chemical environments. The inherent nature of
phenolic resin provides an impervious shield to protect a variety of substrates from the corrosive effects of
chemicals. Laboratory tests confirm minimal degradation from many chemicals after prolonged exposure,
often at elevated temperatures.
♦. Low Smoke and Toxicity
Burning phenolic resin typically generates hydrogen, hydrocarbons, water vapor, and carbon dioxide. Phenolic resin produces a relatively low amount of smoke at a relatively low level of toxicity.
♦ .High Carbon and Char Yield
Phenolic resins demonstrate higher char yields than other plastic materials when exposed to temperatures
above their point of decomposition. In an inert atmosphere at high temperatures (600° - 2,000°F, 300 -
1,000°C), phenolic resin will convert to a structural carbon known as vitreous carbon. In many ways, this
material behaves similar to ceramic and may actually contribute to structural integrity when exposed to fire
Phenol Formaldehyde Resin P2324 is recommended for Impregnating Glass Cloth in Cut-off Wheels.The glass cloth used for reinforcing the wheel is impregnated with phenolic resin. The procedure for coating this glass cloth is as follows:
The glass cloth is dipped in liquid phenolic resin, dried at 80–100 C for 3–10 min, and after drying, is cut to the size of the wheel. The amount of the wet impregnated resin on the glass cloth is controlled from 30 to 50%.
Phenolic resin is designed such that the glass cloth is not tacky when stored and the adhesion is increased between phenolic resin and the grain. The strength of glass cloth determines rotational strength. Therefore, the fabric strength and the type of weave are important. This effect demonstrates the safe rotational speed of a glass reinforced wheel of 4,500 m/min verses 3,000 m/min for a wheel without glass cloth reinforcement
|Curing time @150°C||80-100||GB/T24411-2009|
the package is paper-plastics bag in 25KGS each one
The storage life of this product is several months in a cool and dry place in original closed bags