Payment & Shipping Terms:
|Appearance:||Light Yellow Powder||Package:||25kg Or 500kgs Bag|
|Curing Time:||50-70s||Monomers:||Phenol And Formaldehyde|
Phenol Formaldehyde Resin F3620-1 is produced by condensing a molar excess of phenol to formaldehyde in the presence of an acid catalyst. This produces a thermoplastic resin. To cure this resin, a hardening agent is used, HMTA (or hexa). Under heat and pressure, it yields ammonia and formaldehyde as methylene groups to cure the resin, hence the term “two-step,” because of the two formaldehyde additions. A novolak phenolic resin has an infinite shelf life under normal storage conditions.Cured phenolic resin provides the rigidity necessary to maintain structural integrity and dimensional stability even under severe conditions.
A. Bonding Strength
The primary use of phenolic resin is as a bonding agent. Phenolic resin effortlessly penetrates and adheres to the structure of many organic and inorganic fillers and reinforcements, which makes it an ideal candidate for various end uses.
B. High Temperature Performance
A key characteristic of thermoset phenolic resin is its ability to withstand high temperature under mechanical load with minimal deformation or creep. In other words, cured phenolic resin provides the rigidity necessary to maintain structural integrity and dimensional stability even under severe conditions.
C. Chemical Resistance
Phenolic resins accommodate the harsh exposure of severe chemical environments. The inherent nature of
phenolic resin provides an impervious shield to protect a variety of substrates from the corrosive effects of
chemicals. Laboratory tests confirm minimal degradation from many chemicals after prolonged exposure,
often at elevated temperatures.
4. Low Smoke and Toxicity
Burning phenolic resin typically generates hydrogen, hydrocarbons, water vapor, and carbon dioxide. Phenolic resin produces a relatively low amount of smoke at a relatively low level of toxicity.
D .High Carbon and Char Yield
Phenolic resins demonstrate higher char yields than other plastic materials when exposed to temperatures
above their point of decomposition. In an inert atmosphere at high temperatures (600° - 2,000°F, 300 -
1,000°C), phenolic resin will convert to a structural carbon known as vitreous carbon. In many ways, this
material behaves similar to ceramic and may actually contribute to structural integrity when exposed to fire
Phenol Formaldehyde Resin F3620-1 is recommended for Bonded Abrasives.Bonded abrasive structure consists of two basic components such as grain and bond for most wheels, some voids or pores. The grain must be self-renewing during operation; bond created by phenolic resin provides strength and heat resistance as well as uniformity in bond strength to facilitate regeneration of grain during grinding, and finally the pores of the bonded abrasive draw out the grinding dust or debris.
First,grain and phenolic resin are mixed. The mix which is known as “coated grain” is molded in a press. Molded parts are cured in an oven, finished, checked, and wrapped.
|Curing time @150°C||85-105||GB/T24411-2009|
the package is paper-plastics bag in 25KGS each one
The storage life of this product is several months in a cool and dry place in original closed bags